I got a plan! I have recently come across two ka's for a Great price of free.99!!!. So what should I do with them? This my plan for one of the motors. Tell me what you think.
The Plan
>
Wiseco Pistons for the Nissan KA24DE engine. These pistons are 89.5mm and 10.5:1 compression. The compression height is 1.336". The part # is K587M895.
>
Brian Crower Stage 2 Camshafts for 240sx KA24DE with 264 Intake, 264 Exhaust, and 9.52mm lift. Plug and play application. Short duration for nice street manners, slight lope at idle. Excellent all purpose spec. OEM spring OK. V2 Specification.
>
Brian Crower dual valve springs + seats + retainers.
>
a Cometic Multiple Layer Stainless Steel Head Gaskets for the Nissan KA24DE engines. This gasket is 91mm bore & 1.0mm (-0.2mm) thick. This thinner head gasket will give you a little more compression than stock when using the standard pistons. This gasket will work with 90mm (+1) bores up to 91mm (+2mm).
>
insulating Intake Manifold Px3 Gasket for the 91-94 & 95-98 Nissan 240sx 240-sx with KA24DE DOHC 2.4L motor. Produces a cooler intake manifold and intake charge resulting in MORE POWER. A cooler intake charge also reduces the tendency for detonation, meaning ignition timing can be advanced for MORE POWER.
>
Xcessive Manufacturing's intake manifold for the KA24DE motor (RWD) is designed to take advantage of the factory high port/runner design and dramatically increase flow for boosted motors or N/A motors looking for more mid to high rpm power. With smooth radiused entry and angle cut runners, a velocity stack effect is achieved without having stacks protruding into plenum airflow and causing turbulence. The new plenum is permanent mold cast for superior finish and casting soundness with a phenolic shell core used for internal walls to yield some of the best quality available. The plenum is drilled for the factory throttle body and bolt pattern but comes pre machined for up to a 70 mm bore (Up to 80 mm bore available and custom bolt patterns as special order, call prior to ordering.) The two piece runner/plenum design also allows for easier porting and polishing of the intake.
>
Greddy E-Manage Blue
Unit includes all components listed below:
Wiring Harness
* 18-pin, E-manage Main Harness * (Main harness)
* 18-pin, E-manage Injector Wires * (Increase injector duty cycles, injector logging and control sub-injectors.)
* 12-pin, E-manage Ignition Harness * (Control ignition system timing)
Greddy Support Tool w/ USB/Serial cable and Software
* Program your Greddy E-Manage unit with support tool.
>